How to remove push-fit plumbing fittings

plumbing fittings

Nowadays, people usually prefer to push-fit plumbings as compared to PVC pipes. Push-fit plumbings are preferred because they are easy to use, and no dangerous solvents are present. It has neoprene-O rings are present inside the fittings that make it more tight and waterproof. Push-fit plumbing fittings are easy to attach and also easy to remove. Plumbing fittings made up of cement-like glue or some sticky things. Push fit fittings are made under many brands names and every push fit fittings have different look. All push fit fitting have almost same internal structure that makes it watertight seal.

Push-fit fitting easily, and you can quickly reposition it when you want to do it. When the connection is fixed temporarily, the fitting can be used efficiently, and with very ease, it can easily be removed. There are few simple tools to remove push-fit plumbing fittings with that easily. You must have basic knowledge about the plumbing related things. Acccording to
plumbers in Cary nc one of the easiest methods of eliminating push-fit plumbing fittings is by using heat to that particular area. To do this, you can use a hairdryer to heat the glue. In this article, you will get to know the few simple that how to use a dryer for removing push-fit plumbing fittings.

1-  Placing a small piece of board under pipe:

The first step you have to do is place a tiny piece of the board inside the pipe by using fitting. The board’s size is 2 to 4 inches in length, not more than 2-4 inches size. It will help to hold the pipe more easily with the pilers. It will also help to heat the whole circumference of the tube and also the fitting. Small piece under pipe holds the great importance as it helps to heat the fitting more efficiently and makes work more easy.

2-  Use a hairdryer for heating:

In the second step, now take the hairdryer and heat the fitting and also the pipe. Adjust the hairdryer setting on its hottest level. Keep the hairdryer about 3-4 inches away from the fitting and also from the tube. Heat the pipe and fitting for almost 4-5 minutes. In 4-5 minutes, it will start to melt the push-fit plumbing fittings. Almost after 10 minutes of heating, it will completely melt the glue, and the pipe can easily be removed from the fitting.

3- Pull away the fitting:

In the third step, grasp the pipe by using two slip joint pliers. With the help of the second pair of pliers, you can easily twist the tube’s fittings. When you bend the pipe, the heat that area again with the hairdryer and dislodges the fitting more; keep one thing in mind that does not apply much force on the tube that it may damage the pipe. You can easily pull away the fitting and remove the push-fit plumbing fittings. It is available in many kinds and of various materials and used for different application. Every type of pipe have its push fit fittings which is exclusively designed for them.


In a nutshell, some tools are specially designed to remove the push-fit plumbing fittings easily. It is good to keep the device for eliminating the push-fit plumbing fittings even if you think of using the push-fit fittings for a permanent repair. Also, make sure one thing while buying push-fit fittings that they are approved for long term use. The package label of the push-fit plumbing fittings tells you about the accepted usage of the plumbing fittings. The lousy quality of push-fit fittings compromise the watertight seal and damage the o-ring. By using good quality plumbing fittings, you can also easily remove it without much effort. In this article, the steps written will help you easily remove the push-fit plumbing fittings. 

Be the first to comment on "How to remove push-fit plumbing fittings"

Leave a comment